Accessibility Statement

What's New In Tools

A board with a hole drilled in it, with a pocket drilling guide on top and a drill beside it

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Pocket Drilling Guide

$18.50

08K1415 - 18-Pc. Sample Pack of 5" Ultimax Ligno Grip Discs

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

18-Pc. Sample Pack of 5" Mirka Ultimax...

$16.40

Using a Veritas tabling scribe to mark a cut line on a chair leg

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Tabling Scribe

$39.50

A track saw alignment jig set on a workbench next to a track saw and guide rail

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Track Saw Alignment Jig

$39.50

08K2215 - 18-Pc. Sample Pack of 6"" Ultimax Ligno Grip Discs

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

18-Pc. Sample Pack of 6" Mirka Ultimax...

$22.30

Using a Veritas joiner’s knife to trim a dovetail joint for a precise fit

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Joiner's Knife

$46.50

Sliding a RockStar stone into the stainless-steel case

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Shapton RockStar Stones with Stainless...

From: $82.00

A wide board passing through a 16-32 drum sander

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Laguna SuperMax 16-32 Drum Sander with...

$1,999.00

61M0500 - Stainless-Steel RockStar Stone Case

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Shapton Stainless-Steel RockStar Stone...

$34.50

Using a 45 oz hammer to install patio stones

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Trusty-Cook Standard Dead-Blow Hammers

From: $29.50

08K1401 - 5" 40x Ultimax Ligno Grip Disc, ea.

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Mirka Ultimax Ligno 5" Grip Discs

From: $1.12

A man uses a dead-blow sledgehammer to pound a post into the ground

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Trusty-Cook Dead-Blow Sledgehammers

From: $105.00

A wide board being fed through the 19-38 drum sander

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Laguna SuperMax 19-38 Drum Sander with...

$2,599.00

08K2201 -

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Mirka Ultimax Ligno 6" Grip Discs

From: $1.52

A bandsaw being moved with the mobile base

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Mobile Base for Rikon 18" Bandsaw

$136.00

61M0505 - RockStar 3000x Stone

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Shapton RockStar Stones

From: $52.00

MK114 - Lee Valley MIY Box with Lid Kit

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Make It Yourself Box with Lid Kit

$120.00

Resawing a board on a Rikon 18" bandsaw

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Rikon 18" Deluxe Bandsaw (Model 10-342...

$3,399.00

Using a hammer to adjust a plane blade

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Trusty-Cook Slimline Dead-Blow Hammers

From: $28.50

A turner uses an Easy Wood Pro Easy finisher to hollow a wooden bowl on a lathe

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Easy Wood Pro Easy Turning Tools

$219.00

03J0801 - Laguna P

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Laguna P|Flux 1 Cyclone Dust Collector

$3,799.00

A turner uses an Easy Wood mid-size Easy finisher to hollow a wooden bowl on a lathe

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Easy Wood Mid-Size Tools

$169.00

A REVO 12

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Laguna REVO 12|16 Midi Lathe

$1,299.00

05N4665 - Set of 4 Veritas Metric Edge Rules

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 4 Veritas Metric Edge Rules

$69.50

36B0180 - Mid-Size Easy Rougher, Unhandled

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Easy Wood Unhandled Mid-Size Tools

$139.00

03J0820 - Laguna C

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Laguna C|Flux 1 Cyclone Dust Collector

$2,599.00

Marking wood with a pencil set against the edge of a Veritas edge rule saddling a workpiece corner

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Imperial Edge Rules

From: $12.50

36B0183 - Full-Size Easy Rougher, Unhandled

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Easy Wood Unhandled Full-Size Tools

$159.00

The 360 degree trigger clamps are clamping a piece of wood to a drill press

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

360° Trigger Clamps

From: $28.90

A woodworker uses a spreader to apply Rubio Monocoat Part A to a piece of wood

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Rubio Monocoat Part A

$36.00

17N1101 - Pro FMT Jig

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Leigh Pro Frame Mortise & Tenon Jig

$1,939.00

17N0225 - Leigh D4R Pro Dovetail Jig

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Leigh D4R Pro Dovetail Jig

$1,069.00

Using two micro-trigger clamps with a wooden block to create a stop block for use with a drill press

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Micro-Trigger Clamp

$7.00

Applying Osmo 2K wood oil to a board with a pad

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Osmo 2K Clear Wood Oil

From: $76.00

A dovetail saw leaning against a board on a workbench

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Bad Axe Stiletto Dovetail Saw

$410.00

ZTU577359 - Festool Planex LHS 2-M Drywall Sander

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool Planex LHS 2-M Drywall Sander

$1,299.00

Knew Concepts Mk.IV Aluminum Swivel Fret Saws

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Knew Concepts Mk.IV Aluminum Swivel Fr...

From: $159.00

ZA577932 - Festool FS 1400 2-KP Guide Rail Starter Set

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool FS 1400 2-KP Guide Rail Starte...

$535.00

Marking wood with a pencil along the edge of a Veritas edge rule set flush with the end of the stock

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Metric Edge Rules

From: $12.50

ZT578150 - Festool ETS EC 125 + Net Abrasive Combo Kit

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool ETS EC 125 + Net Abrasive Comb...

$759.00

ZT578151 - Festool ETS EC 150 + Net Abrasive Combo Kit

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool ETS EC 150 and Net Abrasive Co...

$919.00

ZA577963 - Transport Bag for Festool Planex LHS 2-M Drywall Sander

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Transport Bag for Festool Planex LHS 2...

$259.00

Festool FS-Bag 1900 Guide Rail Bag

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool FS-Bag 1900 Guide Rail Bag

$125.00

ZA578070 - Festool FS-Bag 3000 Guide Rail Bag

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Festool FS-Bag 3000 Guide Rail Bag

$130.00

Knew Concepts Marquetry Sets

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Knew Concepts Marquetry Sets

From: $839.00

Applying Osmo UV Protection Oil to a wooden Adirondack chair

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Osmo UV Protection Oil

From: $59.00

A child wearing hearing protectors

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Children's Hearing Protectors

$24.95

A tenon saw on a workbench

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Bad Axe Left-Hand No. 9 Precision Teno...

$499.00

A carcass saw on a workbench

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Bad Axe Bayonet Precision Carcass Saw

$439.00

Log mill in the process of cutting the second face of a small log perpendicular to the first

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

AccuRight Log Mill

$239.00

42L9525 - Mortise & Tenon Magazine, Issue 15

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Mortise & Tenon Magazine, Issue 15

edited by Joshua A. Klein

$32.50

The miter mill slicing rounds from the end of a small log

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

AccuRight Miter Mill

$176.00

A MagFence II attached to a bandsaw table to the left of the blade, viewed from the rear of the fence

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Magfence II

$189.00

A tenon saw on a workbench

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Bad Axe Right-Hand No. 9 Precision Ten...

$499.00

Scraping grout using a razor blade in a holder

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

6" Holder & 6 Orange Plastic Razor Bla...

$11.50

22R7280 - Trend Airshield Pro Full-Face Shield

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Trend Airshield Pro Full-Face Shield

$659.00

22R7281 - Trend Airshield Pro Clip-On Ear Defenders

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Trend Airshield Pro Clip-On Ear Defend...

$89.90

Quercus Magazine, Issue 21

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Quercus Magazine, Issue 21

edited by Nick Gibbs

$8.50

70M2104 - Burnishing Rod for Scraper Plane Blades

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Accu-Burr Burnishing Rod for Scraper P...

$72.50

27K8075 - Allit Pro Deep Professional Case

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Allit Pro Deep Professional Case

$59.50

A F.A.S.T. fence magnetic block attached to a bandsaw blade

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

F.A.S.T. Fence Alignment System Tool

$82.50

05N4655 - Set of 4 Veritas Imperial Edge Rules

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 4 Veritas Imperial Edge Rules

$69.50

An open leather wallet standing up on a table

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Premium Bifold Wallet Kit

$69.50

6", 8" and 10" Cabinet Rasps

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Cabinet Rasps

From: $39.50

05N0530 - Set of 4 Bench Rules – 6", 12", 18" & 24"

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Set of 4 Veritas Imperial Aluminum Ben...

Set (4)

$49.50

03K1821 - Viking Arm Cabinet Installation Kit

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Viking Arm Cabinet Installation Kit

$99.00

A Viking Arm assembly jack being used with the base plate and lift bar pads to raise a pane of glass

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Viking Arm Lift Bar & Base Plate Pads

$24.90

A pair of Quickloader auto-retract ratchet straps placed on a flagstone with their straps retracted

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Quickloader Auto-Retract Ratchet Strap...

(Pair)

$46.50